Skip to content
GAS SPRINGS & LIFT SUPPORTS · B2B SUPPLY
sales@horizongasspring.comEspañol
Horizon Gas SpringHORIZONGAS SPRING
← All furniture applicationsFURNITURE COMPONENT SUPPLY

Gas springs for lift-top tables and height-adjustable work surfaces

Compression supports for lift-top coffee tables and lockable gas springs for the height-adjustment mechanisms of tables, work surfaces and lecterns. Spring bodies, end fittings and release controls are specified for the table assembly; complete columns are a separate configuration.

View references Send a parts list

Matching product family: Compression supports · Lockable units & releases

Lift-top & adjustable tables — full furniture model with gas spring position highlighted in red
APPLICATION MODEL · Red highlights the gas spring position. Mounting layout varies by mechanism.
WHERE IT WORKS

Inside the lift-top linkage, or inside the vertical height-adjustment column.

Lift-top mechanisms raise and move a tabletop with a compression support. A lockable gas spring provides adjustment and holding within a suitable table column or linkage. Horizon quotes the gas-spring component and selected release parts; the complete table mechanism is a separate assembly.

Compression supports · Lockable units & releases
Lockable gas spring with cable release and lever; suitable configuration depends on the table mechanism
Lockable gas spring with cable release shown. A lift-top mechanism may instead use a compression support.

Lift-top coffee tables

Swing-up tabletop mechanisms may combine a strut, linkage and closing control.

Side tables & bistro tables

Pneumatic columns combine the internal spring with guides, mounting flanges and release control.

Worktables & lecterns

Match adjustment travel, installation space and release operation to the complete assembly.

SPECIFICATION & ORDER OPTIONS

Define the component in your quotation.

The quotation brings together the component, dimensions, connections and order quantity. An existing marking or drawing provides the starting specification; millimeters or inches are accepted.

Gas spring mounting lengths: fully extended L1, fully compressed L2 and stroke S equals L1 minus L201 / MEASUREMENTExtended and compressed lengthMOUNTING CENTER TO MOUNTING CENTERFULLY EXTENDEDL1 / Extended lengthFULLY COMPRESSEDL2 / Compressed lengthSTROKES = L1 - L2Use the same mounting references in both positions.Schematic. The short rod neck and end-fitting geometry depend on the actual assembly.
Dimension guide for a separate gas spring. Use the approved mechanism or column drawing when matching a complete assembly.
01

Mechanism type

Swing-up tabletop or vertical height adjustment; complete assembly or internal spring.

02

Travel & installed height

Required table-height range and the reference drawing dimensions for the component you are buying.

03

Release & holding action

Cable or lever arrangement, release-head interface and locking behavior.

04

Mounting & quantity

Flange or end-fitting dimensions, tabletop/load information and order quantity.

Column heights and mechanism widths describe complete assemblies. They must not be reused as the length or stroke of an internal gas spring.

PUBLISHED MATCHING REFERENCES

5 references for this application.

Choose a reference and include your quantity. Keep the reference, dimensional scope and mechanism conditions with your request.

Find the reference you needChoose a filter or enter a complete part number.
5 published references

Third-party brand names and part numbers are shown for cross-reference only. Send the reference and quantity; we quote gas springs made in our own factory and confirm the dimensions and connections in your quotation.

Cross-reference: SUSPA 13652065

Pneumatic table column (VariStand reference) - 415 mm adjustment, chrome

Side/bistro tables, lecterns, carts and overbed tables

Dimensions and 120 N value describe the complete VariStand column, not the internal gas spring.

Assembly matching

Complete pneumatic table column
Tabletop flange; base flange 3 x M6 on 58 mm pitch circle
Assembly reference — Extended length: 1040 mm; Compressed length: 625 mm; Stroke: 415 mm; Column force: 120 N; Tube diameters: 75 / 70 mm

Quote this reference →
Cross-reference: SUSPA 13652067

Pneumatic table column (VariStand reference) - 225 mm adjustment, chrome

Side/bistro tables, lecterns, carts and overbed tables

Dimensions and 120 N value describe the complete VariStand column, not the internal gas spring.

Assembly matching

Complete pneumatic table column
Tabletop flange; base flange 3 x M6 on 58 mm pitch circle
Assembly reference — Extended length: 660 mm; Compressed length: 435 mm; Stroke: 225 mm; Column force: 120 N; Tube diameters: 75 / 70 mm

Quote this reference →
Cross-reference: SUSPA 13652064

Pneumatic table column (VariStand reference) - 415 mm adjustment, silver gray

Side/bistro tables, lecterns, carts and overbed tables

Dimensions and 120 N value describe the complete VariStand column, not the internal gas spring.

Assembly matching

Complete pneumatic table column
Tabletop flange; base flange 3 x M6 on 58 mm pitch circle
Assembly reference — Extended length: 1040 mm; Compressed length: 625 mm; Stroke: 415 mm; Column force: 120 N; Tube diameters: 75 / 70 mm

Quote this reference →
Cross-reference: SUSPA 13652066

Pneumatic table column (VariStand reference) - 225 mm adjustment, silver gray

Side/bistro tables, lecterns, carts and overbed tables

Dimensions and 120 N value describe the complete VariStand column, not the internal gas spring.

Assembly matching

Complete pneumatic table column
Tabletop flange; base flange 3 x M6 on 58 mm pitch circle
Assembly reference — Extended length: 660 mm; Compressed length: 435 mm; Stroke: 225 mm; Column force: 120 N; Tube diameters: 75 / 70 mm

Quote this reference →
Cross-reference: Häfele UK 643.12.201

Lift-top coffee/side-table mechanism (Tavoflex reference)

Swing-up tabletop with access to storage below

Mechanism reference: 698 mm installation width and 5 kg reference load rating belong to the whole mechanism; bare strut dimensions and force are not published.

Assembly matching

Complete tabletop lifting mechanism
Match dimensions from the original assembly
Assembly reference — Installation width: 698 mm; Load capacity: 5 kg

Quote this reference →
B2B COMPONENT SUPPLY

A defined component for production and replacement orders.

Your quotation identifies the gas-spring component, selected connections, quantity and packaging requirements. Use the same agreed specification when reordering.

Request a quotation